Tile - Shop Tile Flooring & Wall Tiles (2024)

FAQs

What is the 3 4 5 rule for laying tile? ›

To get a perfectly square corner, you want to aim for a measurement ratio of 3:4:5. In other words, you want a three-foot length on your straight line, a four-foot length on your perpendicular line, and a five-foot length across. If all three measurements are correct, you'll have a perfectly square corner.

It is a matter of personal preference. Traditionally, smaller wall tiles are combined with larger floor tiles to add contrast and texture. But, larger wall tiles look great in smaller bathrooms as they create the illusion of space.

For example, if the square footage of the space is 120 square feet and each tile is 12 inches by 12 inches, the calculation would be 120 square feet / (12 inches x 12 inches) = 120 square feet / 144 square inches = 0.83 tiles.

Double herringbone is created by connecting two rectangular shaped tiles with each other. This pattern is not commonly installed because it can be a difficult layout to perfect.

With the popularity of rectangular tiles, the pattern of choice has been the 50% offset or brick joint. While this pattern can be very attractive, it can also be frustrating when the inherent warpage on the long side of the tile causes lippage.

There is no hard and fast rule about whether floor tiles should be darker than walls, as it ultimately comes down to personal preference and the design of the room. However, a darker tile can help to ground a space and can be used to create a sense of depth and dimension.

Today we're going to share a lot of tips with you and in the end you'll be more confident to start setting tile in your bathroom. Always tile the back wall first in a shower/tub so that you can hide the grout joints on the sides.

On average, you can expect to pay between $15 and $20 per square foot for tile flooring. But the price for tile installation can range from $4 to $110.

GROUT JOINT SIZE FOR LARGE AND HEAVY TILE

Daltile recommends that large tiles have a 1/8” or 3/16” minimum grout joint for the most successful installation. The difference is not really noticeable visually, but can make a big difference to the quality of the installation.

As a rough estimate, the amount of tiles you will require for a three-bedroom house is around 2,000 – 4,000 tiles however this number can vary extremely based on the factors we have mentioned.

Do you start in the middle of the floor when laying tile? ›

Whether you're tiling walls or floors, always lay the first tile in the middle and work outwards. If you start from the edge, you're likely to end up with inconsistent grout lines, messy edges etc, so take the time to prepare properly in order to get it right.

The first and most important rule is that the tiles should be clean and dry when you start placing them. There should be no grease, curing compounds, wax or other substances on the surface of the tiles and all forms of contamination should be avoided.

Next, mark reference lines for the tile. Start by measuring two opposite walls and snapping a chalk line between the center points. Then do the same for the remaining walls. This will give you a starting point.